Blink Working

Blink/blink/managed_components/espressif__led_strip/include/led_strip.h

@@ -0,0 +1,111 @@
+/*
+ * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+
+#include <stdint.h>
+#include "esp_err.h"
+#include "led_strip_rmt.h"
+#include "esp_idf_version.h"
+
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 1, 0)
+#include "led_strip_spi.h"
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief Set RGB for a specific pixel
+ *
+ * @param strip: LED strip
+ * @param index: index of pixel to set
+ * @param red: red part of color
+ * @param green: green part of color
+ * @param blue: blue part of color
+ *
+ * @return
+ *      - ESP_OK: Set RGB for a specific pixel successfully
+ *      - ESP_ERR_INVALID_ARG: Set RGB for a specific pixel failed because of invalid parameters
+ *      - ESP_FAIL: Set RGB for a specific pixel failed because other error occurred
+ */
+esp_err_t led_strip_set_pixel(led_strip_handle_t strip, uint32_t index, uint32_t red, uint32_t green, uint32_t blue);
+
+/**
+ * @brief Set RGBW for a specific pixel
+ *
+ * @note Only call this function if your led strip does have the white component (e.g. SK6812-RGBW)
+ * @note Also see `led_strip_set_pixel` if you only want to specify the RGB part of the color and bypass the white component
+ *
+ * @param strip: LED strip
+ * @param index: index of pixel to set
+ * @param red: red part of color
+ * @param green: green part of color
+ * @param blue: blue part of color
+ * @param white: separate white component
+ *
+ * @return
+ *      - ESP_OK: Set RGBW color for a specific pixel successfully
+ *      - ESP_ERR_INVALID_ARG: Set RGBW color for a specific pixel failed because of an invalid argument
+ *      - ESP_FAIL: Set RGBW color for a specific pixel failed because other error occurred
+ */
+esp_err_t led_strip_set_pixel_rgbw(led_strip_handle_t strip, uint32_t index, uint32_t red, uint32_t green, uint32_t blue, uint32_t white);
+
+/**
+ * @brief Set HSV for a specific pixel
+ *
+ * @param strip: LED strip
+ * @param index: index of pixel to set
+ * @param hue: hue part of color (0 - 360)
+ * @param saturation: saturation part of color (0 - 255, rescaled from 0 - 1. e.g. saturation = 0.5, rescaled to 127)
+ * @param value: value part of color (0 - 255, rescaled from 0 - 1. e.g. value = 0.5, rescaled to 127)
+ *
+ * @return
+ *      - ESP_OK: Set HSV color for a specific pixel successfully
+ *      - ESP_ERR_INVALID_ARG: Set HSV color for a specific pixel failed because of an invalid argument
+ *      - ESP_FAIL: Set HSV color for a specific pixel failed because other error occurred
+ */
+esp_err_t led_strip_set_pixel_hsv(led_strip_handle_t strip, uint32_t index, uint16_t hue, uint8_t saturation, uint8_t value);
+
+/**
+ * @brief Refresh memory colors to LEDs
+ *
+ * @param strip: LED strip
+ *
+ * @return
+ *      - ESP_OK: Refresh successfully
+ *      - ESP_FAIL: Refresh failed because some other error occurred
+ *
+ * @note:
+ *      After updating the LED colors in the memory, a following invocation of this API is needed to flush colors to strip.
+ */
+esp_err_t led_strip_refresh(led_strip_handle_t strip);
+
+/**
+ * @brief Clear LED strip (turn off all LEDs)
+ *
+ * @param strip: LED strip
+ *
+ * @return
+ *      - ESP_OK: Clear LEDs successfully
+ *      - ESP_FAIL: Clear LEDs failed because some other error occurred
+ */
+esp_err_t led_strip_clear(led_strip_handle_t strip);
+
+/**
+ * @brief Free LED strip resources
+ *
+ * @param strip: LED strip
+ *
+ * @return
+ *      - ESP_OK: Free resources successfully
+ *      - ESP_FAIL: Free resources failed because error occurred
+ */
+esp_err_t led_strip_del(led_strip_handle_t strip);
+
+#ifdef __cplusplus
+}
+#endif

Blink/blink/managed_components/espressif__led_strip/include/led_strip_rmt.h

@@ -0,0 +1,53 @@
+/*
+ * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+
+#include <stdint.h>
+#include "esp_err.h"
+#include "led_strip_types.h"
+#include "esp_idf_version.h"
+
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
+#include "driver/rmt_types.h"
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief LED Strip RMT specific configuration
+ */
+typedef struct {
+#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
+    uint8_t rmt_channel;        /*!< Specify the channel number, the legacy RMT driver doesn't support channel allocator */
+#else // new driver supports specify the clock source and clock resolution
+    rmt_clock_source_t clk_src; /*!< RMT clock source */
+    uint32_t resolution_hz;     /*!< RMT tick resolution, if set to zero, a default resolution (10MHz) will be applied */
+#endif
+    size_t mem_block_symbols;   /*!< How many RMT symbols can one RMT channel hold at one time. Set to 0 will fallback to use the default size. */
+    struct {
+        uint32_t with_dma: 1;   /*!< Use DMA to transmit data */
+    } flags;                    /*!< Extra driver flags */
+} led_strip_rmt_config_t;
+
+/**
+ * @brief Create LED strip based on RMT TX channel
+ *
+ * @param led_config LED strip configuration
+ * @param rmt_config RMT specific configuration
+ * @param ret_strip Returned LED strip handle
+ * @return
+ *      - ESP_OK: create LED strip handle successfully
+ *      - ESP_ERR_INVALID_ARG: create LED strip handle failed because of invalid argument
+ *      - ESP_ERR_NO_MEM: create LED strip handle failed because of out of memory
+ *      - ESP_FAIL: create LED strip handle failed because some other error
+ */
+esp_err_t led_strip_new_rmt_device(const led_strip_config_t *led_config, const led_strip_rmt_config_t *rmt_config, led_strip_handle_t *ret_strip);
+
+#ifdef __cplusplus
+}
+#endif

Blink/blink/managed_components/espressif__led_strip/include/led_strip_spi.h

@@ -0,0 +1,46 @@
+/*
+ * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+
+#include <stdint.h>
+#include "esp_err.h"
+#include "driver/spi_master.h"
+#include "led_strip_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief LED Strip SPI specific configuration
+ */
+typedef struct {
+    spi_clock_source_t clk_src; /*!< SPI clock source */
+    spi_host_device_t spi_bus;  /*!< SPI bus ID. Which buses are available depends on the specific chip */
+    struct {
+        uint32_t with_dma: 1;   /*!< Use DMA to transmit data */
+    } flags;                    /*!< Extra driver flags */
+} led_strip_spi_config_t;
+
+/**
+ * @brief Create LED strip based on SPI MOSI channel
+ * @note Although only the MOSI line is used for generating the signal, the whole SPI bus can't be used for other purposes.
+ *
+ * @param led_config LED strip configuration
+ * @param spi_config SPI specific configuration
+ * @param ret_strip Returned LED strip handle
+ * @return
+ *      - ESP_OK: create LED strip handle successfully
+ *      - ESP_ERR_INVALID_ARG: create LED strip handle failed because of invalid argument
+ *      - ESP_ERR_NOT_SUPPORTED: create LED strip handle failed because of unsupported configuration
+ *      - ESP_ERR_NO_MEM: create LED strip handle failed because of out of memory
+ *      - ESP_FAIL: create LED strip handle failed because some other error
+ */
+esp_err_t led_strip_new_spi_device(const led_strip_config_t *led_config, const led_strip_spi_config_t *spi_config, led_strip_handle_t *ret_strip);
+
+#ifdef __cplusplus
+}
+#endif

Blink/blink/managed_components/espressif__led_strip/include/led_strip_types.h

@@ -0,0 +1,54 @@
+/*
+ * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief LED strip pixel format
+ */
+typedef enum {
+    LED_PIXEL_FORMAT_GRB,    /*!< Pixel format: GRB */
+    LED_PIXEL_FORMAT_GRBW,   /*!< Pixel format: GRBW */
+    LED_PIXEL_FORMAT_INVALID /*!< Invalid pixel format */
+} led_pixel_format_t;
+
+/**
+ * @brief LED strip model
+ * @note Different led model may have different timing parameters, so we need to distinguish them.
+ */
+typedef enum {
+    LED_MODEL_WS2812, /*!< LED strip model: WS2812 */
+    LED_MODEL_SK6812, /*!< LED strip model: SK6812 */
+    LED_MODEL_INVALID /*!< Invalid LED strip model */
+} led_model_t;
+
+/**
+ * @brief LED strip handle
+ */
+typedef struct led_strip_t *led_strip_handle_t;
+
+/**
+ * @brief LED Strip Configuration
+ */
+typedef struct {
+    int strip_gpio_num;      /*!< GPIO number that used by LED strip */
+    uint32_t max_leds;       /*!< Maximum LEDs in a single strip */
+    led_pixel_format_t led_pixel_format; /*!< LED pixel format */
+    led_model_t led_model;   /*!< LED model */
+
+    struct {
+        uint32_t invert_out: 1; /*!< Invert output signal */
+    } flags;                    /*!< Extra driver flags */
+} led_strip_config_t;
+
+#ifdef __cplusplus
+}
+#endif